ZWILLING 3 Stage Knife Sharpener


Safely and easily keep your knives razor sharp with the Zwilling 3-stage pull through knife sharpener. Ceramic rods in both coarse and fine grits will put an edge on even the dullest knife with only a few strokes. The protected safety grip keeps your fingers out of harms way while allowing the sharpener to stay firmly on a surface.

Out of stock

Quickly and safely sharpens your blades and scissors
Non-slip bottom
Comfortable handle also protects fingers
Two stages, coarse and fine
Scissor slot

How to Use: Knife (not suitable for serrated knives):
1. Insert the knife perpendicular to the sharpener into the Coarse slot
2. Using moderate pressure, pull the knife through the slot from the head to the tip. Repeat this action as necessary up to 20 times depending on the dullness of the blade.
3. Move the blade to the Fine slot. Using light pressure, pull the knife through the slot from the heel to the tip. Repeat 5-10 times.
4. Wipe your blade clean.5. To check sharpness, draw your knife through a piece of scrap paper. If the blade slices the paper easily without tearing, it is sharp.If not, repeat steps 1-4.
1. While holding the scissors with your dominant hand, open them slightly to insert into the slot.
2. Gently close the blades around the ceramic sharpening grit and pull back. Repeat this motion 5-7 times. Do not push scissors through.
3. As with the knives, test the scissors’ sharpness on a piece of paper. If necessary, repeat steps 1-2.

You may also like…